Table of Contents
Advertisement
Starting Remote UI
To operate remotely, you need to input the IP address of the machine into a Web browser and start the Remote UI.
Check the IP address set to the machine in advance (
questions, ask your Network Administrator.
1
Start the Web browser.
2
Enter "http://(the IP address of the machine)/" in the address field, and press the
[ENTER] key.
●
If you want to use an IPv6 address, enclose the IPv6 address with brackets (example: http://
[fe80::2e9e:fcff:fe4e:dbce]/).
If a security alert is displayed
A security alert may be displayed if communication with an Apple device is encrypted (
Communication of Print Data for Mobile Devices with TLS(P. 276) ). When certificate settings or TLS
settings have no errors, continue browsing the Web site.
3
Log on to the Remote UI.
When Department ID Management is disabled
Select [System Manager Mode] or [General User Mode].
[System Manager Mode]
You can perform all the Remote UI operations and configure all the settings. Enter the appropriate ID in
[System Manager ID] and PIN in [System Manager PIN] (
(imageRUNNER 2204F / 2204N / 2004N)(P. 359) ).
[General User Mode]
You can check the status of documents or the machine, and you can also change some of the settings. If
you wish to delete your print documents, enter the user name of the documents in [User Name]. The user
Using Remote UI (imageRUNNER 2204F / 2204N / 2004N)
Viewing Network Settings(P. 326) ). If you have any
Setting the System Manager ID
399
1053-06K
Encrypting
Advertisement
Table of Contents
