Concluding Steps - Fujitsu PRIMERGY RX2560 M2 Upgrade And Maintenance Manual

Hard disk drive (HDD) / solid state drive (SSD)
Figure 193: Connecting cables from expander board to controller
Ê Connect the two SAS cables to the SAS expander board:
– (1) from SAS controller connector MLC1 to SAS expander board X1
– (2) from SAS controller connector MLC2 to SAS expander board X2
I
For a complete cabling overview, please refer to section
on page 512.
7.7.1.5

Concluding steps

"Installing the system fan holder" on page 94
Ê
"Installing the system air duct" on page 92
Ê
"Reassembling" on page 74
Ê
"Connecting the power cord" on page 87
Ê
"Resuming BitLocker functionality" on page 136
Ê
"Switching on the server" on page 90
Ê
278
Upgrade and Maintenance Manual
SAS MLC1
SAS MLC2
"Cabling plans"
TX2560 M2 / RX2560 M2