Installing 3.5-Inch Hdd Modules; Preliminary Steps; Removing A 3.5-Inch Hdd Dummy Module - Fujitsu PRIMERGY RX2560 M2 Upgrade And Maintenance Manual

Hard disk drive (HDD) / solid state drive (SSD)
7.3.9

Installing 3.5-inch HDD modules

Customer Replaceable Unit
(CRU)
Tools: tool-less
7.3.9.1

Preliminary steps

Ê When working on a tower server, open the HDD bay cover as described in
section "Removing accessible drive and HDD bay covers" on page
Ê Locate the correct drive bay as described in section
configurations" on page
7.3.9.2

Removing a 3.5-inch HDD dummy module

Figure 132: Removing a 3.5-inch dummy module
Ê Press both tabs together (1) and pull the dummy module out of its bay (2).
V
CAUTION!
Save the dummy module for future use.
Always replace dummy modules into unused HDD bays to comply
with applicable EMC regulations and satisfy cooling requirements.
218
206.
Upgrade and Maintenance Manual
Hardware: 5 minutes
"3.5-inch HDD
TX2560 M2 / RX2560 M2
71.