Basic hardware procedures
4.5
Reassembling
V
CAUTION!
Before attaching the covers, make sure no unnecessary parts or tools
●
are left inside the server.
In order to comply with applicable EMC regulations (regulations on
●
electromagnetic compatibility) and satisfy cooling requirements, the
server must not run while the top/side cover is removed.
For further safety information, please refer to chapter
●
information" on page
4.5.1
Rack server (RX2560 M2)
4.5.1.1
Installing the rack mounting frame
Figure 21: Installing the rack mounting frame (A)
Ê Fit the rack mounting frame on the server front.
Ê Ensure that the rack mounting brackets properly engage on both sides of the
chassis as shown in the close-up.
74
43.
Upgrade and Maintenance Manual
"Important
TX2560 M2 / RX2560 M2