Fujitsu PRIMERGY RX2560 M2 Upgrade And Maintenance Manual page 249

Figure 161: Inserting the 4x 3.5 HDD extension box
Ê If applicable, route the cables of the ultraslim ODD through the bay.
Ê Insert the 4x 3.5-inch HDD extension box into installation bays 1 to 3 and
carefully push in until it lines up with the front panel.
Ê Engage the locking bar as described in section
locking bar" on page
TX2560 M2 / RX2560 M2
Hard disk drive (HDD) / solid state drive (SSD)
102.
Upgrade and Maintenance Manual
"Closing the accessible drive
249