Removing A Non-Hot-Plug Hdd/Ssd - Fujitsu PRIMERGY RX2560 M2 Upgrade And Maintenance Manual

Hard disk drive (HDD) / solid state drive (SSD)
Figure 178: Removing the non-hot-plug cage
Ê Remove one screw (see circle).
Ê Slide the non-hot-plug cage in the direction of the arrow (1).
Ê Take off the non-hot-plug cage from the top cover (2).
7.6.1.3

Removing a non-hot-plug HDD/SSD

Figure 179: Removing the non-hot-plug HDD/SSD 1
Ê Remove the four screws (two screws on each side, circles show one side).
Ê Take off the non-hot-plug HDD/SSD 1 from the non-hot-plug cage.
Ê If applicable, remove the non-hot-plug HDD/SSD 2 in the same way.
266
Upgrade and Maintenance Manual TX2560 M2 / RX2560 M2