14.6
iRMC microSD card
I
The iRMC microSD card is necessary for using the embedded Lifecycle
Management (eLCM) functionality of the iRMC. It requires a valid eLCM
license key, which is always purchased together with the iRMC microSD
card and activated through the iRMC web frontend.
For further information, please refer to the "ServerView embedded
Lifecycle Management (eLCM)" user guide.
14.6.1 Installing the iRMC microSD card
Upgrade and Repair Unit
(URU)
Tools: tool-less
14.6.1.1 Preliminary steps
"Shutting down the server" on page 58
Ê
"Disconnecting the power cord" on page 59
Ê
"Getting access to the component" on page 61
Ê
Ê If applicable, remove the riser module 2 as described in section
a riser module" on page
14.6.1.2 Installing the iRMC microSD card
Figure 358: iRMC microSD card
TX2560 M2 / RX2560 M2
98.
Upgrade and Maintenance Manual
System board and components
Hardware: 5 minutes
"Removing
477