Fujitsu PRIMERGY RX2560 M2 Upgrade And Maintenance Manual page 501

Changing the position of the threaded bolt
Figure 371: Changing the position of the threaded bolt
Ê Turn the accessible drive cover with its "RACK" stamping facing up (1, see
close-up).
Ê Remove the threaded bolt from the upper edge of the accessible drive cage
(2).
Ê Reinstall the threaded bolt on the side of the accessible drive cage as shown
(3, see close-up).
TX2560 M2 / RX2560 M2
Converting a tower model to a rack model
Upgrade and Maintenance Manual
501