7.4.2.4
Installing the 8x 2.5-inch HDD extension box
Figure 153: Bending in mounting brackets
Ê Using a screw driver, bend the four mounting brackets of the middle
installation bay (bay 2) inwards (see close-up):
Ê Bend in the lower two mounting brackets on each side of the drive cage.
Ê Disengage the accessible drive locking bar as described in section
the accessible drive locking bar" on page
TX2560 M2 / RX2560 M2
Hard disk drive (HDD) / solid state drive (SSD)
Upgrade and Maintenance Manual
100.
"Opening
239