Replacing The Sata Dom; Preliminary Steps; Concluding Steps - Fujitsu PRIMERGY RX2560 M2 Upgrade And Maintenance Manual

System board and components

14.5.3 Replacing the SATA DOM

Upgrade and Repair Unit
(URU)
Tools: tool-less

14.5.3.1 Preliminary steps

"Locating the defective server" on page
Ê
"Shutting down the server" on page
Ê
"Disconnecting the power cord" on page
Ê
"Getting access to the component" on page 61
Ê
Ê If applicable, remove the riser module 1 as described in section
a riser module" on page

14.5.3.2 Replacing the SATA DOM

Ê Remove the defective SATA DOM as described in section
SATA DOM" on page
Ê Install the new SATA DOM as described in section
DOM" on page

14.5.3.3 Concluding steps

Ê If applicable, install the riser module 1 as described in section
riser module" on page
"Reassembling" on page 74
Ê
"Connecting the power cord" on page 87
Ê
"Switching on the server" on page 90
Ê
476
98.
475.
473.
95.
Upgrade and Maintenance Manual
Hardware: 5 minutes
55.
58.
59.
"Installing the SATA
"Removing
"Removing the
"Installing a
TX2560 M2 / RX2560 M2