Fujitsu PRIMERGY RX2560 M2 Upgrade And Maintenance Manual page 217

I
The HDD numbering as listed in the ServerView RAID Manager differs
from the HDD mounting order:
With SAS expander board and one SAS controller
(Based on cabling
HDDs and SAS 3.0 expander board A3C40181407" on page
Logical drive
Position
[1]
[2]
[3]
[4]
[5]
[6]
[7]
[8]
[9]
[10]
[11]
[12]
[13]
[14]
TX2560 M2 / RX2560 M2
Hard disk drive (HDD) / solid state drive (SSD)
"SAS cabling: 2x 2.5" non-hot-plug HDDs/SSDs / 12x 3.5"
ServerView RAID Manager display name
number (Enclosure number: Port number)
0 Vendor Product (1:0)
1 Vendor Product (1:1)
2 Vendor Product (1:4)
3 Vendor Product (1:5)
4 Vendor Product (1:6)
5 Vendor Product (1:7)
6 Vendor Product (1:8)
7 Vendor Product (1:9)
8 Vendor Product (1:10)
9 Vendor Product (1:11)
10 Vendor Product (1:12)
11 Vendor Product (1:13)
12 Vendor Product (1:14)
13 Vendor Product (1:15)
Upgrade and Maintenance Manual
521)
217