Removing Heat Sinks - Fujitsu PRIMERGY RX2560 M2 Upgrade And Maintenance Manual

11.5.3 Removing heat sinks

Figure 281: Removing the heat sink
Ê Loosen the four captive screws on the heat sink in a crossover pattern (1-4).
Ê Carefully turn the heat sink back and forth to detach it from the CPU.
I
This may be necessary due to the adhesive quality of the thermal
paste located between the heat sink and CPU.
V
CAUTION!
Pay special attention not to damage any system board components
surrounding the CPU socket.
Ê Lift the heat sink out of the chassis.
Ê Thoroughly clean residual thermal paste from the surface of the heat sink
and the CPU using a lint-free cloth.
TX2560 M2 / RX2560 M2 Upgrade and Maintenance Manual
Processor (CPU)
387