Concluding Steps; Hdd/Ssd Modules); Preliminary Steps - Fujitsu PRIMERGY RX2560 M2 Upgrade And Maintenance Manual

Hard disk drive (HDD) / solid state drive (SSD)

7.2.13.7 Concluding steps

"Installing the system fan holder" on page 94
Ê
"Installing the system air duct" on page 92
Ê
Ê Install all removed HDD/SSD modules as described in sections
2.5-inch HDD/SSD module" on page
"Reassembling" on page 74
Ê
"Connecting the power cord" on page 87
Ê
"Switching on the server" on page 90
Ê
7.2.14 Replacing SAS backplanes (configuration with up
to 32 HDD/SSD modules)
Field Replaceable Unit
(FRU)
Tools: Phillips PH2 / (+) No. 2 screw driver

7.2.14.1 Preliminary steps

"Locating the defective server" on page 55
Ê
"Shutting down the server" on page 58
Ê
"Disconnecting the power cord" on page 59
Ê
"Getting access to the component" on page 61
Ê
Ê Remove all HDD/SSD modules as described in section
HDD/SSD modules" on page
"Removing the system air duct" on page 91
Ê
"Removing the system fan holder" on page 93
Ê
190
174.
175.
Upgrade and Maintenance Manual
Hardware: 15 minutes
"Removing 2.5-inch
TX2560 M2 / RX2560 M2
"Installing a