Upgrading To 8X 3.5-Inch Hdd Configurations; Preliminary Steps; Removing The 3.5-Inch Hdd Bay Top Cover - Fujitsu PRIMERGY RX2560 M2 Upgrade And Maintenance Manual

7.3.13 Upgrading to 8x 3.5-inch HDD configurations

Upgrade and Repair Unit
(URU)
Tools: Phillips PH2 / (+) No. 2 screw driver

7.3.13.1 Preliminary steps

"Suspending BitLocker functionality" on page 111
Ê
"Shutting down the server" on page 58
Ê
"Disconnecting the power cord" on page 59
Ê
"Getting access to the component" on page 61
Ê
Ê Remove all HDD modules as described in section
modules" on page
"Removing the system air duct" on page 91
Ê
"Removing the system fan holder" on page 93
Ê

7.3.13.2 Removing the 3.5-inch HDD bay top cover

Ê Remove the 3.5-inch HDD bay top cover as described in section
the 3.5-inch HDD bay top cover" on page
TX2560 M2 / RX2560 M2
Hard disk drive (HDD) / solid state drive (SSD)
220.
Upgrade and Maintenance Manual
Hardware: 20 minutes
"Removing 3.5-inch HDD
224).
"Removing
231