Removing The Sas Expander Board; Preliminary Steps; Removing The Expander Holder - Fujitsu PRIMERGY RX2560 M2 Upgrade And Maintenance Manual

7.7.2

Removing the SAS expander board

Field Replaceable Unit
(FRU)
Tools: Phillips PH2 / (+) No. 2 screw driver
7.7.2.1

Preliminary steps

"Suspending BitLocker functionality" on page 111
Ê
"Shutting down the server" on page 58
Ê
"Disconnecting the power cord" on page 59
Ê
"Getting access to the component" on page 61
Ê
"Removing the system air duct" on page 91
Ê
"Removing the system fan holder" on page 93
Ê
7.7.2.2

Removing the expander holder

Ê Disconnect all cables from the SAS expander board.
Figure 194: Removing the expander holder
Ê Remove the screw (see circle).
Ê Take the expander holder out of the chassis.
TX2560 M2 / RX2560 M2
Hard disk drive (HDD) / solid state drive (SSD)
Upgrade and Maintenance Manual
Hardware: 10 minutes
279