Fujitsu PRIMERGY RX2560 M2 Upgrade And Maintenance Manual page 498

Converting a tower model to a rack model
Removing the accessible drive cage
Ê Remove the front panel module as described in section
panel module" on page
Ê If applicable, remove all accessible drives as described in section
"Removing an accessible drive" on page
Ê If applicable, remove an HDD extension box as described in section
extension boxes" on page
Figure 368: Detaching the accessible drive cage (A)
Ê Remove the two screws (see circles) from the bottom side of the server.
Ê Bring the server back to its horizontal position.
I
At least two people are needed to turn over a fully equipped server.
Remove HDDs and PSUs in order to facilitate the task.
498
437.
237.
Upgrade and Maintenance Manual
"Removing the front
402.
TX2560 M2 / RX2560 M2
"HDD