Installing The Dynamiclom Module - Fujitsu PRIMERGY RX2560 M2 Upgrade And Maintenance Manual

Expansion cards and backup units
9.5.2.3

Installing the DynamicLoM module

Figure 247: Removing the protective foil
Ê Only for DynamicLoM module D3275/D3285: remove the protective foil.
Figure 248: Installing the three bolts
Ê Install three bolts (see circles). Different bolts must be used depending on
the height of the dynamic LOM module (see section
page 332).
338
Upgrade and Maintenance Manual
"Basic information" on
TX2560 M2 / RX2560 M2