Replacing The Ultraslim Odd; Preliminary Steps; Removing The Defective Ultraslim Odd; Installing The New Ultraslim Odd - Fujitsu PRIMERGY RX2560 M2 Upgrade And Maintenance Manual

Accessible drives

12.7.3 Replacing the ultraslim ODD

Upgrade and Repair Unit
(URU)
Tools: – Phillips PH0 / (+) No. 0 screw driver
– Slotted screw driver (for bending in or out accessible drive
mounting brackets)

12.7.3.1 Preliminary steps

"Locating the defective server" on page 55
Ê
"Removing backup and optical disk media" on page 114
Ê
"Shutting down the server" on page 58
Ê
"Disconnecting the power cord" on page 59
Ê
"Getting access to the component" on page 61
Ê
I
Removing the front cover is not required in order to replace the
ultraslim ODD.
"Removing the system air duct" on page 91
Ê
"Removing the system fan holder" on page 93
Ê

12.7.3.2 Removing the defective ultraslim ODD

Ê Remove the ultraslim ODD adapter as described in section
accessible drive" on page
Ê Remove the ultraslim ODD as described in section
ODD from the ultraslim ODD adapter" on page

12.7.3.3 Installing the new ultraslim ODD

Ê Install the ultraslim ODD as described in section
ODD into the ultraslim ODD adapter" on page
Ê Install the ultraslim ODD adapter as described in section
accessible drive" on page
432
402.
398.
Upgrade and Maintenance Manual
Hardware: 10 minutes
"Removing an
"Removing the ultraslim
430.
"Installing the ultraslim
428.
"Installing an
TX2560 M2 / RX2560 M2