Fujitsu PRIMERGY RX2560 M2 Upgrade And Maintenance Manual page 276

Hard disk drive (HDD) / solid state drive (SSD)
Figure 191: Connecting cables from expander board to controller
Ê Connect the two SAS cables to the SAS expander board:
– (1) from SAS controller connector MLC1 to SAS expander board X1
– (2) from SAS controller connector MLC2 to SAS expander board X2
I
For a complete cabling overview, please refer to section
on page 512.
276
Upgrade and Maintenance Manual
SAS MLC1
SAS MLC2
"Cabling plans"
TX2560 M2 / RX2560 M2