Installing The Pcie Switches - Fujitsu PRIMERGY RX2560 M2 Upgrade And Maintenance Manual

Hard disk drive (HDD) / solid state drive (SSD)
Figure 169: Connecting power cable to PCIe SSD extension box
Ê Connect the power cable to both PCIe SSD backplanes (1) and the system
board (2), see cabling plan
page 518. Secure the power cable in the cable clamp (see circle).
Ê Install 2.5-inch PCIe SSDs SFF in the PCIe SSD extension box as described
in section "Installing 2.5-inch HDD/SSD modules" on page
I
The PCIe SSDs SFF are mounted in the same frames as the 2.5-inch
HDD/SSD modules.
7.5.1.3

Installing the PCIe switches

Ê If applicable, attach the required slot bracket to the expansion card as
described in section
258
"Power cabling: 8x 2.5" PCIe SSD SSF" on
"Handling slot brackets" on page
Upgrade and Maintenance Manual
173.
293.
TX2560 M2 / RX2560 M2