Hard disk drive (HDD) / solid state drive (SSD)
7.2.15.4 Concluding steps
"Installing the system fan holder" on page 94
Ê
"Installing the system air duct" on page 92
Ê
"Reassembling" on page 74
Ê
"Connecting the power cord" on page 87
Ê
"Switching on the server" on page 90
Ê
7.2.16 Upgrading from 8x to 16x 2.5-inch HDD/SSD
configurations
Upgrade and Repair Unit
(URU)
Tools: Phillips PH2 / (+) No. 2 screw driver
7.2.16.1 Preliminary steps
"Suspending BitLocker functionality" on page 111
Ê
"Shutting down the server" on page 58
Ê
"Disconnecting the power cord" on page 59
Ê
"Getting access to the component" on page 61
Ê
Ê Remove all HDD/SSD modules as described in section
HDD/SSD modules" on page
"Removing the system air duct" on page 91
Ê
"Removing the system fan holder" on page 93
Ê
202
175.
Upgrade and Maintenance Manual
Hardware: 20 minutes
"Removing 2.5-inch
TX2560 M2 / RX2560 M2