Hard disk drive (HDD) / solid state drive (SSD)
7.4.5.5
Installing the 4x 3.5-inch HDD extension box
Figure 160: Bending in mounting brackets
Ê Using a screw driver, bend the mounting brackets of the top and middle
installation bays (bay 1 and bay 2) inwards (see close-up):
Ê Bend in the four mounting brackets on each side of the drive cage.
Ê Disengage the accessible drive locking bar as described in section
the accessible drive locking bar" on page
248
Upgrade and Maintenance Manual
100.
TX2560 M2 / RX2560 M2
"Opening