HDD prefailure detection
Depending on your hardware configuration HDD prefailure will be supported.
The requirements are:
– iRMC Firmware 7.14 or later
– supported OOB system
– dedicated RAID controller
Not supported RAID controllers
D2616/MegaRAID SAS 9280-8e
D3116/D3116C
Table 7: Not supported RAID controllers
17.2.2.2 Optical drive activity indicator
Figure 425: Indicator on the optical drive
Pos. Indicator
Activity
1
indicator
I
Depending on your system configuration the activity indicator may not be
installed.
TX2560 M2 / RX2560 M2
MegaRAID SAS9285CV-8e
D2607
Status
Description
off
optical drive inactive
green on
storage medium is being accessed
Upgrade and Maintenance Manual
Appendix
557