Fujitsu PRIMERGY RX2560 M2 Upgrade And Maintenance Manual page 556

Appendix
Pos. Label Indicator
AC connected
6
indicator
iRMC-related status signals
Global error
ID indicator
indicator
blue flashing off
blue flashing orange flashing
I
For further information please refer to section
the iRMC" on page
556
Status
green on
off
Description
A remote connection has been
established. Local VGA output has been
disabled during the remote session.
An emergency flash of the iRMC firmware
is in progress.
119.
Upgrade and Maintenance Manual
Description
– The server is switched off and
connected to the mains
(standby mode).
– The server has been switched on
but Power Cycle Delay settings
delay it from turning on for a
specified time.
I
After connecting the server to
the mains, it will take about 60
seconds until the server will
enter standby mode and can
be switched on.
– The server is switched off and not
connected to the mains.
– The server is switched on and
operating normally.
"Updating or recovering
TX2560 M2 / RX2560 M2