Installing The Multibay Box; Concluding Steps - Fujitsu PRIMERGY RX2560 M2 Upgrade And Maintenance Manual

Figure 310: Removing the LSD module from the 3.5-inch installation frame
Ê Press in on the locking latch (see close-up) to disengage the LSD module
(1).
Ê Pull the LSD module out of the 3.5-inch installation frame (2).
Ê If the removed LSD module is not to be replaced by a new module, reinstall
the LSD dummy cover.

12.5.2.5 Installing the Multibay box

Ê Install the Multibay box as described in section
on page 409.

12.5.2.6 Concluding steps

"Installing the system fan holder" on page 94
Ê
"Installing the system air duct" on page 92
Ê
"Reassembling" on page 74
Ê
"Connecting the power cord" on page 87
Ê
"Switching on the server" on page 90
Ê
TX2560 M2 / RX2560 M2 Upgrade and Maintenance Manual
Accessible drives
"Installing the Multibay box"
415