Paper Feed; Transfer Roller Unit; Filter; Used Toner - Ricoh A109 Service Manual

1.11 PAPER FEED

1. Do not touch the surface of the pick-up, feed, and separation rollers.
2. The paper size detector bracket installed in the 1st paper feed tray must
be positioned correctly to align with the actual paper size to avoid paper
misfeeds.

1.12 TRANSFER ROLLER UNIT

1. When inserting the transfer roller unit, make sure that the unit's drive
gear does not damage the transfer belt located above the unit.

1.13 FILTER

1. All the dust filters and ozone filters should be replaced at every PM cycle
(40K scans).
2. When inserting the new development filter, the side with the net should
face towards the ozone filter.

1.14 USED TONER

1. The used toner tank should be emptied at every PM cycle, but we
recommend checking the amount of used toner in the tank at every EM.
2. When reinstalling the used toner tank, make sure that the toner overflow
sensor connector is inserted firmly.
3. Dispose of used toner according to local regulations. Never throw into an
open flame, for toner dust may ignite when exposed to open flame.
FSM 4-7 A109