9. TRANSFER BELT SECTION
9.1 TRANSFER BELT REPLACEMENT
[F]
1. Remove the following parts and pull out the transfer belt unit [A]. (Refer
to section 3 Installation).
•
Toner tank
•
Right inner cover
•
Yellow toner supply receptacle
•
Transfer belt Cleaning unit
•
Transfer belt stay
2. Make the transfer belt unit [A] stand as shown.
3. Move the handle bracket [B] out of the way by unscrewing the 2 screws
[C].
4. Unscrew the securing screw shaft [D].
5. Release the tension of the transfer belt by folding the unit [E].
6. Remove the transfer belt [F] and clean all the rollers.
A109
[A]
[C]
[B]
[E]
5-82
[A]
[D]
FSM