Pressure Roller Replacement - Ricoh A109 Service Manual

13.9 PRESSURE ROLLER REPLACEMENT

[B]
NOTE: When replacing the pressure roller [A] and its ball bearings [B],
lubricate the roller shaft [C] and inner surface of the ball bearings
with Barrierta L55/2.
1. Remove the hot roller (see Hot Roller Replacement).
2. Remove the pressure roller lamp (see Pressure Roller Lamp Removal).
3. Remove the fusing unit entrance guide plate [D] (2 screws).
4. Lift the pressure roller [A] from the front side and pull off the front bearing
[B].
5. Remove the pressure roller.
FSM
[A]
[C]
5-103
[C]
[D]
A109