Sensor/Switch/Signal Data Check (Inputmode) - Ricoh A109 Service Manual

2.3 SENSOR/SWITCH/SIGNAL DATA CHECK (INPUTMODE)

- How to check the sensor/switch/signal -
1. Enter SP mode as follows:
1) Press the mode clear key.
2) Enter "107"
3) Press the clear/stop key for more than 3 seconds.
2
2. Touch [A] on the display to
access SP test mode.
3. Touch Next [B] on the display
six times.
Input No. 000
4. 1) Touch
2) Enter the input
sensor/switch/signal
number by using the number
keys (Refer to the table in the
following pages).
3) Press the Enter key [D].
FSM
1
0
[A]
[C].
4-33
7
C
[B]
[D]
[C]
A109