Installation Procedure; Remove The Covers - Ricoh A109 Service Manual

4.2 INSTALLATION PROCEDURE

4.2.1 Remove the covers

[A]
[C]
CAUTION: Turn off the main switch and unplug the machine before
starting the following procedure.
1. Open the front doors and remove the toner tank unit [A] (2 screws).
2. Remove the right inner cover [B] (3 screws).
3. Remove the right front door [C].
4. Remove the upper rear cover (4 screws).
5. Remove the lower rear cover (4 screws).
6. Swing out the main board [D] (1 screw).
7. Remove the upper right cover [E] (5 screws).
A109
[D]
[B]
[E]
4 Controller Interface Kit Type-A