13.5 OIL BLADE REPLACEMENT
1. Remove the oil supply pad (see Oil Supply Pad Replacement).
2. Remove the oil sump (3 screws and 1 connector).
3. Remove the two oil blade springs [A].
4. Flip the oil blade [B] up and remove it.
CAUTION:
When installing a new blade, apply silicon oil gently
over the entire length of the blade, and turn the fusing
knob clockwise to distribute the oil over the surface of
the roller. This will prevent the blade from flipping.
A109
5-98
[A]
[B]
FSM