Ricoh A109 Service Manual page 421

CUSTOMER SERVICE GROUP
BULLETIN NUMBER:
APPLICABLE MODEL: NC5006
SUBJECT: PARTS CATALOG UPDATES
GENERAL:
The following Parts Updates are being issued for all NC5006 Parts Catalogs. This information should be
incorporated into all existing Parts Catalog documentation.
• •
UPDATE NO. 1 -
OLD PART NO. NEW PART NO.
A1091364 A1097042
A5131180
A5131181
A1661319
* DENOTES NEW ITEM
UNITS AFFECTED:
All NC5006 copiers manufactured after Serial Number A3515090001 will have the new style Rear Lower
Cover installed during production.
INTERCHANGEABILITY CHART:
OLD and NEW parts can be used in both OLD and
0
NEW machines.
NEW parts can be used in OLD and NEW machines.
1
OLD parts CAN NOT be used in NEW machines.
Must be installed as a set on units manufactured prior to the S/N cut-in. On units manufactured aft
3/S
previously modified, use the new part numbers individually.
TECHNICAL SERVICE BULLETIN
NC5006 - 020
REAR LOWER COVER - To comply with CE Mark Standards, the Rear Lower
Cover has been fixed with six (6) screws instead of four (4). Two parts, the
Upper and Lower Stay - Rear Cover, have been added to secure the two
additional screws. When using the new Rear Cover on a machine without the
Upper and Lower Stays, cover the extra screw holes with Push Locks (not
shown).
Upper Stay - Rear Cover
DESCRIPTION
Rear Lower Cover
Upper Stay - Rear Cover
Lower Stay - Rear Cover
Push Lock
Rear Lower Cover
Lower Stay- Rear Cover
QTY INT
1 → 1
1
0 → 1
0 → 1
0 → 2
NEW parts CAN NOT be used in OLD machines.
2
OLD parts can be used in OLD and NEW machines.
OLD parts CAN NOT be used in NEW machines.
3
NEW parts CAN NOT be used in OLD machines.
2/7/96
REFERENCE
PAGE ITEM
35 7
35 27*
35 28*
35 106*
er the S/N cut-in or
Continued...