Key Counter Installation - Ricoh A109 Service Manual

2.6 KEY COUNTER INSTALLATION

[C]
[F]
1. Remove the following parts. (Refer to Exterior And Inner Covers section.)
•
Upper rear cover
•
Right inner cover
•
Upper right cover
2. Remove the key counter cover [A] (2 screws) from the key counter holder
bracket [B].
3. Disconnect the short-circuit connector [C] from the key counter connector
[D].
4. Couple the connector [D] with the key counter connector [E].
5. Hold the fixing plate [F] on the inside of the key counter holder bracket
and insert the key counter holder [G].
6. Align the holes in the fixing plate with the mounting holes of the key
counter holder and secure the key counter holder (2 screws).
NOTE: The fixing plate has three different hole sizes. Use the holes
that match those on the key counter holder that you are
installing.
7. Reinstall all the covers and check the key counter operation.
FSM
[D]
[E]
3-27
[B]
[A]
[G]
A109