Fusing Thermistor Replacement - Ricoh A109 Service Manual

13.4 FUSING THERMISTOR REPLACEMENT

1. Remove the oil supply pad (see Oil Supply Pad Replacement).
2. Remove the oil sump [A] with the fusing thermistor [B] (3 screws and 1
connector).
3. Remove the spring [C] and pull off the fusing thermistor [B].
CAUTION: After installing the thermistor, make sure that it's
movable as shown [D].
FSM
[A]
5-97
[B]
[C]
[D]
A109