Lubricant Brush Clutch Replacement - Ricoh A109 Service Manual

12.2 LUBRICANT BRUSH CLUTCH REPLACEMENT

[C]
[D]
1. Turn off the main switch and unplug the machine.
2. Remove the upper rear cover and swing open the main board [A] (1
screw).
3. Remove the rear supporting frame [B] (5 screws and 2 connectors).
4. Remove the T1/PCC/BR high voltage supply board [C] (2 screws and 4
connectors).
5. Remove the lubricant brush clutch bracket [D] (3 screws and 1
connector).
6. Replace the clutch [E] (1 E-ring).
When installing the new clutch [E], make sure to place
NOTE:
the bushings [F] from the outside of the bracket [D] as
illustrated.
FSM
[A]
[E]
5-93
[B]
[F]
A109