Copier Separation - Ricoh A109 Service Manual

2.2 COPIER SEPARATION

[A]
The machine can be separated into two units (the main frame and paper
supply unit).
Separation of the machine will help the transportation to the customer's site.
1. Open the front door and remove the front securing brackets [A]
(4 screws each).
2. Remove both upper and lower rear covers (4 screws each).
3. Remove the rear securing brackets [B] (4 screws each).
4. Disconnect the connectors running between both units, and free
them from the harness clamps.
5. Lift-up the machine by using the handles.
NOTE: a) When lifting the machine, lift straight up. Positioning pins [C] are
located at the rear.
b) When attaching, make sure to clear the harnesses out of the
way.
FSM
[C]
[B]
3-5
[C]
A109