2. SERVICE PROGRAM MODE
2.1 SERVICE PROGRAM MODE OPERATION
The service program (SP) mode is used to check electrical data, change
modes, and adjust values.
2.1.1 Service Program Access Procedure
1. Press the clear modes key.
2. Enter "107".
3. Press the clear/stop key for more than 3 seconds until the service
program index menu appears on the touch panel display.
4. Touch a number [A] on the
display to access the desired
function.
This copier has 7 service
program modes
Only 5 service program modes
are visible on the touch panel
display at one time.
Use the down key [B] or the up
key [C] to see other service
program mode menus.
2.1.2 To Exit SP Mode
Exit
1. Touch the
A109
1
[A]
key [D].
4-8
0
7
C
[D]
[C]
[B]
FSM