6.7 BY-PASS FEED CLUTCH AND BY-PASS PICK-UP
SOLENOID
[C]
1. Turn off the main switch and unplug the machine.
2. Remove the by-pass feed table. (See Pick-up, Paper Feed and Reverse
Roller Replacement section.)
3. Replace the by-pass pick-up solenoid assembly [A] (2 screws and 1
connector).
4. Remove the idle gear [B] (1E-ring).
5. Replace the by-pass feed clutch [C] (1 connector).
A109
[A]
5-48
[B]
FSM