13.8 PRESSURE ROLLER LAMP REPLACEMENT
[A]
[E]
1. Remove the fusing unit from the machine. (See Fusing Unit Removal.)
2. Remove the handle cover (2 screws).
3. Remove the top cover (1 screw).
4. Remove the fusing unit knob[A] (1 screw).
5. Remove the oil pump assembly [B] (2 screws and 1 clamp) with the oil
tank [C] (1 connector).
6. Uncouple the connectors [D] on each side of the lamp.
7. Remove the front lamp bracket [E] (1 screw).
8. Remove the rear lamp bracket [F] (1 screw).
9. Slide out the pressure roller lamp [G] from the front.
A109
[B]
[C]
[D]
5-102
[D]
[G]
[F]
FSM