4.8 SCANNER MOTOR REPLACEMENT
[A]
[E]
1. Turn off the main switch and unplug the machine.
2. Remove the exposure glass. (See Exposure Glass Removal.)
3. Remove the following parts. (See Exterior and Inner Covers Removal
Section.)
•
Operation panel [A]
•
Upper rear cover [B]
•
Top cover [C]
4. Remove the platen cover position sensor [D] (1 screw and 1 connector).
5. Remove the left scale bracket [E] (2 M3 x 5 screws) and the right stay
bracket [F] (4 screws).
NOTE: Screws [G] are M3 x 5 screws.
6. Remove the rear frame [H] (15 screws).
A109
[C]
[B]
[G]
5-24
[D]
[H]
[F]
FSM