6.4 TRAY LIFT MOTOR (1ST, 2ND, AND 3RD) REPLACEMENT
1. Perform steps 1 to 5 of the Paper Feed Motor Replacement Section.
–1st and 3rd Tray Lift Motor–
•
Free the harness from the clamps and replace the motor [A] (1 screw, 1
connector).
–2nd Tray Lift Motor–
•
Remove the Paper Feed Motor Unit. (See Paper Lift Motor Replacement
Section.)
•
Free the harness from the clamp and replace the motor [A] (1 screws
and 1 connector).
FSM
[A]
5-45
A109