Installation Requirements; Environment; Machine Level - Ricoh A109 Service Manual

1. INSTALLATION REQUIREMENTS

1.1 ENVIRONMENT

1. Temperature Range:
2. Humidity Range:
3. Ambient Illumination:
4. Ventilation:
5. Ambient Dust:
6. If the place of installation is air-conditioned or heated, do not place
the machine
a) where it will be subjected to sudden temperature changes,
b) where it will be directly exposed to cool air from an air conditioner,
c) where it will be directly exposed to heat from a heater.
7. Do not place the machine where it will be exposed to corrosive
gasses.
8. Do not install the machine at any location over 2,000 m (6,500 feet)
above sea level.
9. Place the copier on a strong and level base.
10. Do not place the machine where it may be subjected to strong
vibrations.

1.2 MACHINE LEVEL

1. Front to back:
2. Right to left:
NOTE: The machine legs may be screwed up or down in order to level
the machine. Set a carpenter's level on the exposure glass
when you do this.
FSM
10°C to 32°C (50°F to 89°F)
15% to 90% RH
Less than 2,000 lux (Do not expose to direct
sunlight.)
Minimum space 20 m
Room air should turn over at least
3
30 m /hr/person
3
Less than 0.15 mg/m
3
Oz/yd )
Within 5 mm (0.2") of level
Within 5 mm (0.2") of level
3-1
3
.
-6 -6
(4 x 10 , 4 x 10 ,
A109