Pressure Roller Thermistor Replacement - Ricoh A109 Service Manual

13.10 PRESSURE ROLLER THERMISTOR REPLACEMENT

[C]
[A]
[B]
1. Remove the fusing unit from the machine (see Fusing Unit Removal).
2. Press the two lock tabs and open the fusing exit cover.
3. Disconnect the exit sensor connector [A] and free the harness from the
clamps.
4. Remove the exit cover [B] (1 snap ring).
5. Remove the pressure roller thermistor [C] (1 screw and 1 connector).
CAUTION: When reinstalling the thermistor make sure the
thermistor is in contact with the pressure roller.
A109 5-104 FSM