Sp Test Mode - Ricoh A109 Service Manual

2.2.2 SP Test Mode

Item
Adjusts the laser power for the test
pattern density in 256 grades.
Enables the gradation scale printing.
Enable to create the white margin
between the different density gray
scales.
Selects the kind of gradation scales.
Enables the test pattern printing.
Selects the kind of test patterns.
Factory use only
A109
Function
4-17
Note
Default: 255
This function effects the items
Default: Reset
Default: No
Access the Copy in SP and press
the start key to print the gradation
scales.
Default: Reset
If both test pattern (#205) and
gradation scale (#202) are enabled,
only the gradation pattern is printed.
Access the Copy in SP and press
the start key to print the test pattern.
Do not use in the field.
, .
FSM