REPLENISHING SUPPLIES
Master Roll Replacement
The Master End indicator (
1
Open the original table.
Lift the original table release lever
and lift the original table.
2
Open the right side cover.
3
Lift the pressure release lever in
the direction of the arrow to re-
lease the feed roller pressure.
4
Remove the used master roll and
pull out both spools. Then, insert
both spools into a new master
roll.
When the Master End indicator lights,
it is necessary to replace the master
roll even if some master remains on
the old roll.
121
e
) is lit when it is time to replace the master roll.