Display Vario Sensor - GRAUPNER HoTT 2.4 VARIO Module 33601 Manual

4.1. Display VARIO SENSOR

Please note: the labeling of the arrows of the following displays corresponds to the keys on top of the
SMART-BOX. This
SMART-BOX mx-12/16/20/32 HoTT
ENTER 
ESC 
INC
scroll: value: 
DEC scroll: value: 
INC+DEC SET
The descriptive text describes also primarily the button layout and operation of the SMART-BOX, followed by
the buttons of the mx-16 HoTT as an example in parentheses. Please note that the button layout for example
of the HoTT mc-transmitters (order No. 4758, 4759) may differ. Read the manual of your remote control
system to become familiar with the telemetry operation.
ESC
Vario Sensor
Altitude : 123.2 M
Min. : - 10.8 M
123.3 M
Max. :
Diff./Sec : - 1.5 M
Diff./3s : - 8.5 M
Diff./10s :
In the fi rst row the climb-/sink rate in meter per second is displayed on demand in synchronization with the
warning tones alternating with „Vario sensor" , the vertical speed in meters per second. Sinking is represen-
ted by the negative sign.
Parameter
Altitude
Min.
Max.
Diff. / Sec
Diff. / 3s
Diff. / 10s
If you wish to carry out an adjustment, you must use the INC or DEC buttons ( or ) above the screen to
select the desired parameter (e.g. page 2) by moving the arrow cursor (INC or  moves the cursor down,
DEC oder  moves it up). Simultaneously pressing the INC and DEC (SET) buttons switches the parameter
to be adjusted to inverse video (white on black); this indicates that it can be programmed: pressing the INC
() button at this point increases the value, pressing the DEC () button reduces the value. When the ad-
justment is complete, save the selected setting by pressing the INC and DEC (SET) buttons simultaneously;
the dark background now disappears in order to confi rm this action.
03
assignment is different
ENTER
Parameters which have various setting options in the column Setup,
>
can be modifi ed. If these options are missing, the parameter datas are
displayed only.
Note: The VARIO MODULE is set to the level 0 m after switching on.
The altitude displayed is not the absolute altitude above sea level, but
3.5 M
the relative height from the base!
Description
Current Altitude (Meter)
Minimum Altitude since the start (Meter)
Maximum Altitude since the start (Meter)
Climb-Sink rate (Meter per sec.) - sinking is displayed with
neg. sign
Climb-Sink rate (Meter per 3 sec.) - sinking is displayed with
neg. sign
Climb-Sink rate (Meter per 10 sec.) - sinking is displayed with
neg. sign
depending on
mc-19/mc-22/mc-24/mx-24 HoTT
ENTER
CLEAR
scroll: push Rotary + value: Rotary 
scroll: push Rotary + value: Rotary 
push Rotary
the remote control
Setup
-
-
-
-
-
-
33601 VARIO Modul - Graupner HoTT 2.4
system.