Creating A New Wake-Up Session/Editing A Wake-Up Session - Leica GPS1200+ Applications Manual

14.2

Creating a New Wake-Up Session/Editing a Wake-Up Session

Access step-by-
step
WAKE-UP
XX Wake-Up
Session,
General page
Wake-Up
Step Description
1. Refer to "14.1 Overview" to access WAKE-UP Wake-Up Sessions.
2. NEW (F2)/EDIT (F3) to access WAKE-UP New Wake-Up
Session/WAKE-UP Edit Wake-Up Session.
Editing a wake-up session is similar to creating a new wake-up session. For
simplicity the screens are called WAKE-UP XX Wake-Up Session and differences
are clearly outlined.
A new wake-up session can still be created when there is no CompactFlash card
fitted, though there will be differences in the way the menu works.
.
Description of fields
Field Option
<Config Choicelist
Set:>
<Job:> Choicelist
<Pt Input:> From Job or
Manual
Pt ID Template
<Point ID:> Choicelist
User input
Output
<Antenna User input
Ht:>
STORE (F1)
TMPLT (F3)
Description
The active configuration set for the wake-up
session.
The active job for the wake-up session.
Allows points from the job to be selected or point
ID's to be typed in for <Point ID:>.
Allows points from an point ID template to be
entered for <Point ID:>.
Available for <Pt Input: From Job>.
Available for <Pt Input: Manual>. Input a new
point ID.
Available for <Pt Input: Pt ID Template>. A
point ID can be selected from an ID template
using TMPLT (F3).
Height of the antenna to be used during the
wake-up session. Changing the antenna height
here does not update the default antenna height
as defined in the active configuration set.
GPS1200+
To store the changes and to return to
the screen from where this screen
was accessed.
Available for some options for <Pt
Input:>. To configure ID templates.
187