Creating And Editing Waypoints - Leica MX400 Operating Instructions Manual

Operator's Manual
Search For WPT - allows you to type a symbol, or name and
the screen displays all waypoints having the exact match of the
name you type. If you are unsure of the complete name, type a
few of the characters you know are in the name, and the
software will display all waypoints having the corresponding
characters.
For example, if you are looking for the LA HARBOR EN-
TRANCE and you enter HAR, the screen will display all
waypoints with these three characters in this exact order.

Creating And Editing Waypoints

When editing a waypoint, you are always prompted to select the
appropriate datum. You might occasionally see a prompt warning
you that the waypoint is used either in a stored route or the active
route. You ultimately have the final decision whether to continue
editing the waypoint, or exiting this waypoint by pressing the E key
again to exit the edit mode.
Creating and editing waypoints is real easy.
1. Select the WPT key until the WPT1 screen is displayed.
2. Press the E key.
3. Press the Make New WPT softkey or
align the cursor with the waypoint you want to modify and press
the Edit This WPT softkey.
52
Waypoint
Version 3.3