3-317 IIT Software Failure
Configuration mismatch
Procedure
Change the position of the document sensor. The problem continues.
Y
N
Return to Service Call Procedures.
Rewrite the NVM values.
Status Indicator RAPs
3-317 , 3-318
3-318 IIT Software Failure
Procedure
Switch the power off then on. The problem continues.
Y
N
Return to Service Call Procedures.
Reinstall the software. If the problem continues, check the ESS PWB connectors (P/J Loca-
tions,
Figure
14). If the check is OK, replace the ESS PWB
09/03
2-20
(PL
13.1).
Initial issue
DC 3535/2240/1632, WC M24