Xerox DocuColor 2240 Service Manual page 945

4. Install Alignment Tool in front end of Half Rate Carriage
Figure 3 Installing Alignment Tool in Front End of Half Rate Carriage
5. Check that tool will install in other end of carriage.
If the tool installs, go to step 6.
Repairs and Adjustments
ADJ 6.1
(Figure 3).
09/03
4-162
If tool does not install, loosen the set screws (2) and turn the pulley to align the tool holes
with each other (Figure 4).
1
Loosen set screws (2)
Figure 4 Loosening the Set Screws
2
Rotate Pulley
Initial issue
DC 3535/2240/1632, WC M24